Pure Natural Finest Quality - Interior & Exterior Wood Oil Finish
Pure Natural Tung Oil is made from the pressed seed of the Chinese Tung Nut Tree, and gives a superior finish to linseed oil, which tends to darken with age. It has a smooth clear, low sheen finish that penetrates and nourishes wood, before sealing and providing a water resistant barrier.
Tung Oil contains no solvents, driers or other additives.
The Vernicia fordii produces a seed which, when pressed, is used to make pure natural Tung Oil. This gives a superior finish to linseed oil, which tends to darken with age. It has a smooth clear, low sheen finish while penetrating and nourishing wood, before sealing and providing a water resistant barrier.
Known for its long-term elastic properties, Tung Oil is able to move and flex as wooden surfaces and furniture expand and contract with changing temperature.
You can apply tung oil to almost any wooden surface. This include’s interior and exterior furniture, skirting boards, gates, children’s play areas, food preparation areas etc.
When applying to new wood we would recommend using a thin mixture initially. Firstly to aid absorption into the wood, this mixture can be thinned 50% with white spirit. First of all allow the oil to penetrate for 20-30 minutes before wiping off any excess with a lint-free cloth. Then for subsequent applications the mixture can be applied more heavily. Regardless of whether using the oil inside or out make sure to use 3-4 coats per application.
Tung Oil naturally has a low sheen finish. Use a very fine grade (000) wire wool to buff the finish out after drying.
Tung Oil contains no added driers as it is a all natural product. Allow 1-3 days between coats.
Important: This product will bring out the natural colour of the wood. Always test the product on an inconspicuous area to ensure satisfaction.
Method of application
Best applied with a lint-free rag (e.g T-shirt material). You can also use a brush for application. Allowing enough time to fully penetrate and dry is advisable when applying multiple coats.
10-15 m2 per litre per coat, depending upon porosity, surface texture and thickness applied.
Drying time at 200C:
12 hours to three days per coat, depending on thickness applied.
Ensure surfaces are clean and dry, therefore you should make sure to clean off any dirt and grease before application. For aged wood sand back to a clean ‘bright’ surface and wipe with white spirit to remove all dust and debris.